Company Name __________________________ Job Name __________________________ Date________
LOCK OUT -
If you are
required to repair or maintain any machinery or equipment, or any electrical
power source, start the job by locking out and tagging out all energy sources
and starting mechanisms. Locking or
tagging out is the only sure way to prevent other employees from accidentally
activating the system.
supervisor when tagging out any piece of equipment or machinery so that he is
aware of the situation. Schedule
any maintenance or repairs ahead of time with the supervisor to avoid conflicts
and any interruptions of the work.
Install your tag
out or lock out at the power or ignition source.
If a piece of equipment can be activated from more than one location,
then additional locks or tags may be required.
Make sure that the tag or lock is secure and will not blow off or fall
off the machine.
Machines can still
be harmful even when they are turned off. Make sure that the machine is not coasting to a stop and
watch for moving parts that turn by gravity.
Be careful of air or hydraulic pressure lines that have not been bled.
Read the manufacturers recommendations for repairs to avoid any hidden
dangers such as springs that are under a load that might accidentally be
Remember to remove
your lock and tags after your work is complete.
NEVER remove a lock or tag that has been installed by someone else.
If you find a lock or tag out, contact the person who tagged that
equipment out and the supervisor for further instructions.
NEVER ASSUME THAT SOMEONE JUST FORGOT TO REMOVE THE LOCK OR TAG.
BE SMART - LARGE JOB OR SMALL, TAG IT OUT FIRST !
Job Specific Topics:_______________________________________________________________________________________