Company Name __________________________ Job Name __________________________ Date________
SAFETY - PORTABLE LIGHT STRINGS
these precautions when using portable light strings:
an ordinary light string in an area that could contain flammable vapors. When
used within an enclosed or confined space, the space must be certified as
"Safe for Hot Work" if a conventional string is used. If the
atmosphere is not "Safe for Hot Work", then
"explosion-proof" lights must be used. Keep in mind, when you place
any type of lighting in an area where flammable vapors are present, you are
introducing a source of ignition. This could endanger your life. You will
want to be especially careful during your inspection to make sure that the cord,
all plugs, the fixture and the globe are all in place. Don't forget the gasket
at the bottom of the globe. Make sure everything is clean and tight.
the wiring and fixtures before stringing the lights or before they are energized
or plugged in. Make sure the outer insulation is not damaged, the plug ends are
intact, and the fixtures are not cracked.
light-string must be grounded. Make certain the plug has a ground prong. Never
cut one off. The quality of the ground must be tested frequently. A good ground
could save your life if an electrical fault develops, especially when working in
wet conditions or on metal structures. If a Ground Fault Interrupter (GFI) is
available, use it. GFIs should always be used under wet conditions.
string lights so they are near any combustible items. You know from experience,
that bulbs get hot. Even if they are not in direct contact with the combustible,
heat can build up slowly until the ignition temperature is reached.
certain that all bulbs have guards installed. Not only will this help prevent
the bulb from coming in direct contact with a combustible, it can also protect
you (or someone else) from coming in contact with the bulb and getting burned.
fixtures must have an unbroken bulb installed. The bulb will help prevent you
from coming in contact with the exposed electrical conductors that are present
when a bulb is missing or broken. When you change a broken bulb, disconnect the
power from the light-string and wear gloves to guard against cuts.
Job Specific Topics:_______________________________________________________________________________________